Showing posts with label Stitches. Show all posts
Showing posts with label Stitches. Show all posts

Tuesday, March 10, 2009

ADITI


Aditi
EMBROIDERED SILK SAREE
Festival Collection

Blue handwoven silk saree with heavy floral work of zari, resham. Dark Blue pallu and border decorated with golden handwoven work. Blouse is in dark blue color with handwoven work on the sleeves

Material:
Silk

Saree Size: Length 5.50-6.40 Meters x Width 1.16-1.24 Meters
Blouse Piece: Attached with saree. Saree Width x 1 Meter Length

AMODINI

AMODINI


Amodini
EMBROIDERED SILK SAREE
Festival Collection

This black silk saree having sequins, thread and handwoven work on mustard pallu and border. Blouse is in mustard color with handwoven work on the sleeves

Black handwoven silk saree with work of zari, resham. Goldenish pallu and border with handwoven work. Blouse is in goldenish color with handwoven work on the sleeves

Material:
Silk

Saree Size: Length 5.50-6.40 Meters x Width 1.16-1.24 Meters
Blouse Piece: Attached with saree. Saree Width x 1 Meter Length

Monday, March 9, 2009

Leaf Stitch




This is a pretty way of filling in a leaf shape. Starting at point of leaf, make a straight stitch part way down center. Bring needle out on left edge. Leaving a loop of yarn, insert needle on right edge. Now hold down loop with a small stitch over centre.

Feather Stitch

Feather Stitch

Start a little to left of guide line. Holding thread with left thumb, work a small slanting stitch to the right and a bit below where thread emerged. Needle points to the left. Pull the needle through over thread loop. Make a thread loop on the left of the guide line and work a stitch as before but with needle pointing to right. Pull needle through over thread loop. Make thread loop on left of the guide line and work a stitch as before but with needle pointing to right. Pull needle through over thread loop.

Cross Stitch In 5 Minutes from Yarn Tree

Friday, March 6, 2009

Embroidery Blanket Stitch - Add Crochet Edging on Cloth

Corded brussels stitch

Corded brussels stitchCorded brussels stitch is the easiest to learn when you are starting needlepoint lace.

Thread the tapestry needle with your petal colour and fasten it to the “cordonnet” i.e. the couched thread. Lay a thread across the petal where the line is shown on the pattern and split the double couched thread on the other side of the shape.

Work buttonhole stitches over both the outer cordonnet and the thread stretched across the petal. DO NOT go through the fabric, just lay the stitches on the surface of the film.


Do not pull tightly, you will need to see the loops in order to work the second row. Regularly let your needle drop so that the thread untwists to avoid knots and tangles.



When you reach the outside edge take the thread under the cordonnet and then pass it back in between the doubled thread. Take it across the petal again just below the first line of buttonhole stitches. Take your first stitch of the second row through the outline and under the carried thread. Then work buttonhole stitches into the loops of the first row, taking the needle under the carried thread each time.

When you reach the point where the petal narrows (half way) take your first stitch as before then miss out one or two loops from the previous row before continuing as before to fill the petal with "corded brussells stitch".

When you reach the bottom (or final edge) of the petal slip stitch the corded brussels to the outer cordonnet. If you have a long enough piece of thread you can use this to work buttonhole stitches (corded edge outwards) over the cordonnet all around the petal. Otherwise begin with a new length.

Work five more petals in the same manner. To remove the petals from the backing pad, lift the top layer of fabric and cut the couching stitches. Gently lift the work off the top of the film and pick off any remaining couching threads with tweezers.

Pulled satin stitch

Pulled satin stitch
Pulled satin stitchWe will start in the centre with the pulled satin stitch. This is just one variation on a stitch that can be used in a multitude of ways in pulled work.

The trick is to pull firmly and keep the tension on the pulled thread with your finger at the back of the work while you place the next stitch. Try not to yank the thread as it may break! Keep the same tension throughout the work to keep the pattern looking the same.pulled satin stitch diagram




The first row

We will work in diago
nal rows starting at the big blue dot on the chart. Each stitch is worked over three fabric threads. Work the first three stitches as shown in the diagram. When you bring the thread up through the fabric for stitch 7-8 be careful to count one thread across and six up. You want to end the stitch in the same "channel" that you have created with the first block of three stitches. At my workshops some students end the stitch in the row above which throws everything out. The faint dotted line shows where the thread is carried on the back of the work.

Row 2
When the first two blocks are in place we will travel in the opposite direction for the second diagonal row. Count out to the side from stitch 11-12 to bring the needle up for this next row. (The blue line on the chart shows the position of the thread on the back of the work.) Work the blocks of three stitches in the same manner, starting at the bottom of the stitch and re-entering the fabric at the top of each stitch, as shown by the arrow beside the first block. To start the second block in this row, drop 6 fabric threads and 1 across. Continue with the blocks coloured burgundy on the chart.


pulled satin stitch sample
Pulled satin stitch

And the third row

The third row is coloured pink on the chart. Before we start this row we need to take a travelling stitch out to the side of our stitched area in order to keep the pull on the thread when moving to the next row. This stitch is shown in blue on the chart and is just a little backstitch. It also serves to keep the thread from laying behind the decorative holes in the pattern and therefore showing in the finished piece. Work the third row in a similar manner to before checking the direction of the arrow to make sure the stitches are worked from top to bottom.

Completing the pulled satin stitch area

Complete the rest of the centre square in the same way, using travelling stitches where necessary. Fasten off your threads by taking them underneath the satin stitches on the back of the work.



Diagonal raised band
Pulled satin stitchFor this stitch we will be working over 6 fabric threads. It is best to start at the bottom centre, although it is easier to count if you start nearest to one of the corners of the centre square.

The problem with the latter starting place is the difficulty in getting the pull correct at both the beginning and end of the pattern. When I tried starting here I ended up with a flat section that didn't raise as it should.

Follow the numbers on the diagram to work the vertical stitches first. Begin stitch 3-4 by dropping 3 and moving across 3 fabric threads. Pull tightly so that the stitches form a raised band. This won't be that obvious on the first trip but will give a good effect when you come back down the row to complete the horizontal stitches afterwards.




This second journey is easy as the holes in which to put the needle are already in place.

Work the other three diagonal raised band areas to surround the centre square in the same way. You may find it easier to turn the fabric round so that you can follow the numbering on the diagram in the same way for each side.

Stitches of Chikankari

The basic stitches are six in number and all except one are common to other forms of embroidery.

1) Tepchi is a long running or darning stitch worked with six strands on the right side of the fabric taken over four threads and picking up one. Thus, a line is formed. It is used principally as a basis for further stitchery and occasionally to form a simple shape.


unique chikan
2) Bakhiya, double back or shadow stitch in chikan work is done from the wrong side of the fabric and the design is rendered in the herringbone style. The shadow of the thread is seen through the cloth on the right side.

3) Hool is a fine detached eyelet stitch. Herein, a hole is punched in the fabric and the threads are teased apart. It is then held by small straight stitches all round and worked with one thread on the right side of the fabric. It can be worked with six threads and often forms the center of a flower.

4) Zanzeera is a small chain stitch worked with one thread on the right side of the fabric. Being extremely fine, it is used to finally outline the leaf or petal shapes after one or more outlines have already been worked.

5) Rahet is a stem stitch worked with six threads on the wrong side of the fabric. It forms a solid line of back stitch on the right side of the fabric and is rarely used in its simple form but is common in the double form of dohra bakhiya as an outlining stitch.

unique chikan
6) Banarsi stitch has no European equivalent and is a twisted stitch worked with six threads on the right side of the fabric. Working from the right across about five threads a small stitch is taken over about two threads vertically. The needle is reinserted halfway along and below the horizontal stitch formed and is taken out about two threads vertically on the right above the previous stitch.

7) Khatau is similar to Bakhia, but finer and is a form of applique. In Khatau, the design is prepared on calico material. That is placed over the surface of the final fabric and then paisley and floral patterns are stitched on to it.

8) Phanda and Murri are the forms of stitches used to embroider the centre of the flowers in ordinary chikan work motifs. They are typically French knots, with murri being rice-shaped and phanda millet-shaped.

9) Jali stitch is the one where the thread is never drawn through the fabric, ensuring that the back portion of the garment looks as impeccable as the front. The warp and weft threads are carefully drawn apart and minute buttonhole stitches are inserted into the cloth.

unique chikan
10) Turpai and Darzdari are also significant stitches in chikan work. Turpai should have an effect of a thin thread. Darzdari have several varieties, the popular ones are Kohidarz, Kamal darz, Shankarpara darz, Muchii and Singbhada darz.

11) The various other types of legendary chikankari stitches are: Pechani, Bijli, Ghaspatti, Makra, Kauri, Hathkadi, Banjkali, Sazi, Karan, Kapkapi, Madrazi, Bulbul-chasm, Taj Mahal, Janjeera, Kangan, Dhania- patti, Rozan, Meharki, Chanapatti, Baalda, Jora, Keel kangan, bulbul, sidhaul, ghas ki patti etc.

12) Drifting apart from the original pristine setting, the tone-on-tone embroidery is in vogue these days. The significant use of beads, sequin and mokaish (white flat silver strip embroidery) have gained wide acceptance.

Fabric
In addition to the white base fabric, colored fabrics and threads are also used. Silk and cotton threads are employed for embroidery work on sarees, dupattas, table linen and kurtas. Cotton being the most preferred choice, chikankari is also done on mulls, muslins, voiles, organzas and polyester. Some more include: chiffon, viscose, georgette, polyester georgette, cotton crepe and net. The designs change every other month, as per the market trends, with colors that perfectly match with the season